Install N900W8UBU2DOL1 Android 5.0 Lollipop on galaxy Note 3 SM-N900W8

N900W8UBU2DOL1 Android 5.0 Lollipop official firmware for
Samsung Galaxy Note 3 SM-N900W8 is out and the users can now manually download the firmware zip file from here at
NasirTech. Samsung time to time releasing software update for all their Android
Smartphone and tablet devices and it is always recommended to update the latest
available firmware for your device as with every new firmware version Samsung introduces fixes
for bugs (if any), improvement in overall OS performance and sometime introduces
new features. Continue reading this page to find N900W8UBU2DOL1 download
link along with flashing instructions and rooting guide (if available).

N900W8UBU2DOL1 Firmware Details:

Model: SM-N900W8
Model Name: Samsung Galaxy Note 3
Version: Android 5.0 Lollipop
PDA: N900W8UBU2DOL1

N900W8UBU2DOL1 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name

Panama: N900W8UBU2DOL1_N900W8UUBDOK1_TPA

Guatemala: N900W8UBU2DOL1_N900W8TFGDOK1_TGU

(Firmware for rest of the countries and carrier will be added here when available)

N900W8UBU2DOL1 Installation Methods:

How to Update Official Firmware on Galaxy Note 3 SM-N900W8 via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy Note 3 SM-N900W8 through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update N900W8UBU2DOL1 Firmware on Galaxy Note 3 N900W8 through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way
to update official firmware. So, below you’ll find step by step manual
guide to update the UBU2DOL1 5.0 Lollipop firmware on your Galaxy Note 3 N900W8
through Odin software on your PC or Laptop.

Points to be noted:

5) If your Galaxy Note 3 N900W8 have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.

Steps to update N900W8UBU2DOL1 5.0 Lollipop firmware on Galaxy Note 3 N900W8 through Odin: 

Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 5.0 Lollipop build version number UBU2DOL1. You can verify the firmware update details from Settings-About Phone.

Related:

Update N900W8UBU2DOG2 Android 5.0 Lollipop on Galaxy Note 3 SM-N900W8 [Complete Installation]

Install N900W8VLU2DOD1 Android 5.0 Lollipop on Galaxy Note 3 SM-N900W8 [Full Tutorial]

Update N900W8VLU2DOC4 Android 5.0 Lollipop on Galaxy Note 3 SM-N900W8 [Full Installation]

Stuck at boot animation screen? Fix Bootloop on Galaxy Note 3 SM-N900W8

If anything goes wrong, your device may stuck at booting animation. If your Galaxy Note 3 SM-N900W8 stuck at boot animation screen for more than 10 minutes, then follow these instructions:

  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root N900W8UBU2DOL1 5.0 Lollipop Firmware: 

How to Root N900W8UBU2DOL1 Android 5.0 Lollipop Firmware

If you are looking for anything else related to the above firmware, then mention in comment below.

Powered By WizardRSS.com | Full Text RSS Feed

NasirTech | #1 Samsung Firmware Destination

Incoming search terms:

    xplosed buat samsung ace nxt 2,cyanogen14 g313hz,game hacker galaxy noot3 teen pati

Leave a Reply

Your email address will not be published. Required fields are marked *